Inserting A Side Zipper - Baby Lock Crafter's Choice BLCC2 Instruction And Reference Manual

01
6 Select stitch .
• For details, refer to "Selecting stitching"
(page 56).
CAUTION
●
When using zipper foot "I", be sure to
select the straight stitch (center needle
position), and slowly turn the handwheel
toward you (counterclockwise) to check
that the needle does not touch the
presser foot. If a different stitch is
selected or the needle hits the presser
foot, the needle may bend or break.
7 Topstitch around the zipper.
1
2
1 Stitching
2 Right side of fabric
3 Basting stitching
4 End of zipper opening
CAUTION
●
When sewing, be sure that the needle
does not touch the zipper, otherwise the
needle may bend or break.
8 Remove the basting stitching.
3
4

Inserting a side zipper

Stitching is sewn on only one piece of fabric. Use
this type of zipper application for side openings and
back openings.
1
1 Stitching
2 Right side of fabric
3 End of zipper opening
The following procedure will describe how to stitch
on the left side, as shown in the illustration.
Attach zigzag foot "J" and sew straight
1
stitches up to the zipper opening.
With the right sides of the fabric facing each
other, sew reverse stitches after reaching the
zipper opening.
• For details, refer to "Basic Stitching"
(page 62).
Using a basting stitch, continue sewing to the
2
edge of the fabric.
1
2
1 Basting stitching
2 Reverse stitches
3 Wrong side of fabric
4 End of zipper opening
3 Press open the seam allowance from the
wrong side of the fabric.
1 Wrong side of fabric
2
3
3
4
1
Zipper Insertion 73
3