Making Connections - Korg Toneworks AX1B Owner's Manual

4. Making connections

Before you make connections, be sure to turn off the power of your other equipment, or turn the volume
down to zero. Connecting cables are sold separately.
Hard disk recorder etc.
Mono output - mono 1/4" jack/stereo
output - two mono 1/4" jacks
Bass amp / powered monitor (*1)
Mono 1/4" jack - mono 1/4" jack
AC adapter (*2) to AC outlet
*1: The OUTPUT/PHONES jack is a stereo output. If you use a mono phone cable to connect the AX1B to a bass
amp, only the L (left) sound will be output.
*2: If you use batteries, the AC adapter is not necessary. If you use an AC adapter, be sure to use only the specified
model (DC9V
OUTPUT/PHONES
DC9V
).
Audio system
Stereo 1/4" jack - stereo RCA
(phone) jack
Headphones (*1)
Mono 1/4" jack - mono 1/4" jack
INPUT
Introduction
Bass
9