Write; Restoring The Preset Programs (Factory Setting Programs) - Korg Toneworks AX1G Owner's Manual

Edit mode

WRITE

A program you edited or created can be written
(stored) into memory.
When the Write operation is selected, the LCD will
indicate "WRITE", and the program number will blink
in the PROGRAM/NOTE display.
1
Use the BANK SELECT key or the VALUE [+]
[-] keys to select the bank and program num-
ber into which you wish to write the settings.
When you select the writing destination, the pro-
gram name of that writing destination will be dis-
played briefly.
Before you write an edited program onto an-
other program number, make sure that it is OK
to overwrite that program.
2
Press the ENTER key to write the program.
When you write the program, the LCD will indi-
cate "COMPLT" for approximately one second. If
you decide not to write, press the PAGE [√] or
[®] keys to select another display, and the Write
operation will be canceled.
ENTER key: Execute the Write operation
BANK SELECT key: Select the bank
VALUE [-]/[+] keys: Select the program number
16
1
1
2
4. Restoring the preset programs (factory
setting programs)
1
While simultaneously pressing the PAGE [√]
and VALUE [+] keys, turn on the power.
The LCD will indicate "PLOAD?".
If you press the VALUE [-] key, you will jump to
the initial power-on display without loading the
preset programs, and the AX1G will enter Play
mode.
1
2
Press the VALUE [+] key.
The LCD will change to "PLOAD," and the preset
programs will be loaded. While the data is being
loaded, the bank and program number of the pro-
gram currently being loaded will be shown by
the BANK/TUNER LEDs and in the PROGRAM/
NOTE display.
When loading is complete, the LCD will indicate
"COMPLT" for approximately one second. Then
the initial power-on display will appear, and the
AX1G will enter Play mode.
Never turn off the power while this operation is
in progress.
Be aware that if you reload the preset programs,
all previously written programs will be overwrit-
ten.
1
green 0–9
orange 0–9
red 0–9
2