How To Play; Step 1: Insert The Storybook Cartridge; Step 2: Turn The; V.reader Tm On - VTech V.Reader Interactive E-Reading System User Manual

How to Play

STEP 1: Insert the Storybook Cartridge

Make sure the unit is turned off.
Insert the V.reader
on the back of the unit and push until it clicks into place. The label should face
away from you (image 3).
STEP 2 : Turn the V.reader
Turn the V.reader
STEP 3: Personalize Your V.reader
The first time you power on the V.reader
screens. These allow you to personalize your V.reader
and a picture for your avatar. Use the keyboard to type in your name, and press
the green checkmark when you're done. Use the blue arrows to scroll through
the avatar choices, and touch one to choose. Press the green checkmark when
you're done.

STEP 4: System Menu

In the System Menu, there are five icons:

storybook cartridge firmly down into the cartridge slot located
tM
On
tM
on by holding down the on/oFF button for a few seconds.
tM
3
tM
, you will see My Name and My Avatar
tM
by adding your name
tM