Building Over A Cupboard Or Drawer; Building Over A Kitchen Unit With Door - AEG 116 K Operating Instructions Manual

Building over a cupboard or drawer

If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat
resistant board below the base of the hob on the underside of the work surface.
It is also recommended to carry out the electrical connection to the hob as shown in diagrams
1 and 2.
1
ON/OFF SWITCH
FLEX
OUTLET
FO 0763

Building over a kitchen unit with door

Proper arrangements must be taken in
designing the furniture unit, in order to avoid
any contact with the bottom of the hob which
can be heated when it is operated. The
recommended solution is shown in diagram
3.
The panel fitted under the hob ("a") should
be easily removable to allow easy access if
technical assistance is needed. The space
behind the kitchen unit ("b") can be used for
connections.
16
2
ON/OFF SWITCH
FLEX
OUTLET
FO 0764
3
a
60
b
FO 1013