AEG 130 FF-m Instruction Book
AEG 130 FF-m Instruction Book

AEG 130 FF-m Instruction Book

Fryer, design "domino"

Advertisement

Quick Links

GB
INSTRUCTION BOOK

Advertisement

Table of Contents
loading

Summary of Contents for AEG 130 FF-m

  • Page 1 INSTRUCTION BOOK...
  • Page 2 Congratulations from AEG Dear Customer, Congratulations with your new Hob. It is important that you become familiar with the functions and features of the Hob. You should therefore read these operating instructions as they will help you get the most out of your new Hob.
  • Page 3 How to read the operating instructions: 1... 2...Step by step Hint and tips Safety information Environmental information...
  • Page 4: Product Liability

    The hob unit is intended for ordinary the cleaning agents used. household cooking purposes. Any other use can result in damage to the The appliance is not intended for use unit as well as personal injury. by young children or infirm persons without supervision.
  • Page 5: Areas Of Use

    That the safety rules in the instructions frying receptacle. The filter dome have not been complied with. must face upwards when in position. That repair has been made by others than an authorised service technician. Installation The unoriginal spare parts have been The electrical installation must be used.
  • Page 6 Please keep childeren out of reach!! Rember that the heating elements and the frying oil remain searing hot for a long period after you have turned off the appliance. Never pour water into hot frying-oil. If the frying oil catches fire, turn off the extractor hood.
  • Page 7 Steel cover Frying basket Max. oil level Min. oil level Control lamp Heating element for fryer Control knob...
  • Page 8: Control Lamp

    Operation of the fryer Control knob for fryer. The temperature is regulated by a Kontrolleuchte für die Friteuse thermostat and may be set between 120˚C and 190˚C. 190˚ Control lamp 170˚ The control lamp will light when the fryer is switched on and will switch off when the set temperature is achieved.
  • Page 9: Overheating Protection

    Overheating protection Overheating protection during any overheating of the oil at the fryer will switch the inserted overheating protection off the friteuse. Customer service for the remedy of the disturbance contacts. Steel lid for the fryer When using the combi-grill as a fryer you can place the steel lid on top of the frying container, it will shorten the preheating time.
  • Page 10 The heating elements and the oil will stay hot long time after the fryer has been shut off. Do never pour water into the hot oil as the water explosiverly will start boiling Panel Taking off the panel You can take the panel off, which makes it easier to clean the surface.
  • Page 11: Stainless Steel Surfaces

    Stainless steel surfaces Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid scouring cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis.
  • Page 12 1. Remove the safety shield from the drain cock. 2. Place a bowl under the drain cock. Make sure the bowl is large enough to hold the oil in the container. 3. Open the drain cock and let the oil run into the bowl.
  • Page 13: Electrical Connections

    Element voltage 220 V Electrical connections 220 AV, 1 phase, neutral + earth Total power comsumption 1830 W This unit is labelled to indicate conformity with the lowvoltage directive ( 73/23/EEC ) and the EMC directive ( 89/336/EEC ).
  • Page 14 The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm. Fixing Unscrew the fixing brackets just enough so they may be turmed. Fasten the brackets to the worktop with a screw driver.
  • Page 15 If the appliance is mounted in a 270 X 490 mm cutout, or if for other reasons there is no room for the side attachments, these should be removed before the appliance is set into the worktop. Set the appliance into the worktop and then raise it enough to expose the screws in the sides.
  • Page 16 The units externally measured length 145 mm: Cooker hood 290 mm: Two-burner ceramic-top electric hob Two-burner gas hob Grill Fryer Combi grill 580 mm: Four-zone ceramic-top electric hob Four-burner gas hob 725 mm: Four-zone ceramic-top electric hob...
  • Page 17 The electrical installation must only be made by a certified electrician. The electrical installation must be made according to prevailing regulations for heavy current installations and comply with local public regulations. No attempt must be made to tamper with the electrical parts of the unit. The hob is supplied with a 1,5 metre power cable without plug and is to be connected to an external relay with a...
  • Page 18: Warranty

    Check to see whether a fuse has by an alternative service organisation, blown. approved by the distributor. Only spare parts delivered by the distributor may be used. Spare parts and service are the Check to see whether the relay is switched off.
  • Page 19 Select the desired temperature and wait for the fryer lamp to go out. The oil is now at the desired temperature. NB!! Remember that moist foodstuff should be dried before frying (ie. seafood, vegetables, fruit, fish). After frying the basket is lifted out and carefully shaken to remove excess oil (the basket may be hung on the fixing bracket in order to let the oil run off...
  • Page 21 Food residue left in the oil must be side and switch on the fryer. After a removed before the fryer is used again few minutes the oil is once again hot because of fire risk! enough and the chips may be fried until they are crispy.

Table of Contents