Advertisement
2940UWPro-ig.qxd
12/21/98 9:55 AM
C
AUTION
SCSI Card 2940UW Pro host adapter.
Connect one end of the internal SCSI cable to the
S
4
TEP
SCSI Card 2940UW Pro's internal SCSI connector.
Each cable included in this package allows you to connect up to
two internal SCSI devices. To connect more than two internal
SCSI devices to each internal connector on the SCSI Card
2940UW Pro, you will need an internal SCSI cable with enough
connectors to accommodate all of your devices. See the SCSI
Card 2940UW Pro User's Reference for additional information
on connecting your SCSI devices and ordering cables
Connect the other end of the cable to the last internal device
S
5
TEP
(this device must be terminated;
see Step 2 above).
Terminated Internal SCSI Device
Connect the remaining connectors
S
6
TEP
on the cable to any remaining inter-
nal devices (these devices must not
be terminated; see Step 2 above).
Terminated Internal SCSI Device
Unterminated Internal SCSI Device
Page 4
Do not connect SCSI devices to all three connectors of a
High-density 68-pin Internal SCSI Cable
Standard 50-pin Internal SCSI Cable
Internal 50-pin SCSI Connector
(Use with Standard and Ultra SCSI
Devices)
Internal 68-pin SCSI Connector
(Use with Wide and Ultra Wide SCSI
Devices)
Internal SCSI Cable
4
.
Advertisement
