Adaptec AHA-2940 - SCSI Card Installation Manual page 10

2940UWPro-ig.qxd 12/21/98 9:55 AM
Computers with DOS 6.x or Above
Turn on all external devices and then the computer.
S 1
TEP
Insert the Adaptec EZ-SCSI Setup Disk in your floppy disk drive.
S 2
TEP
At the DOS prompt, type a a : : \ \ d d o o s s i i n n s s t t if you are using the A drive,
S 3
TEP
or b b : : \ \ d d o o s s i i n n s s t t if you are using the B drive. Then press Enter.
Follow the instructions that appear onscreen.
S 4
TEP
Computers with NetWare, OS/2, SCO UNIX,
and UnixWare
The Adaptec 7800 Family Manager Set included in this package
allows you to install or update existing drivers for NetWare, OS/2,
SCO UNIX, and UnixWare. Refer to the 7800 Family Manager Set
User's Guide for installation instructions.
C
ONGRATULATIONS
You've finished installing SCSI Card 2940UW Pro.
Troubleshooting hints are in the next section. For additional
troubleshooting hints and information on using and configuring
the SCSI Card 2940UW Pro and SCSI devices, see the SCSI Card
2940UW Pro User's Reference.
Page 10
!
10