AT&T OneVision DEFINITY G3 Fault Management Installation And Integration Manual page 56

Integration for cabletron spectrum on a sunos

Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:

Table of Contents

Telnetting to the Proxy Agent

6. Once you have logged in, execute the Proxy Agent application by

entering the command g3-ma. The system opens the G3-MA main

screen.

NOTE:

The Proxy Agent is based on existing AT&T PBX management

software called Generic 3 Management Ap plications (G3-MA).

For this reason, you enter commands and view screens that

operate like the G3-MA interface. If you already have G3-MA, then

you will be familiar with how to use the Proxy Agent.

7. Press

Return

do not press

few seconds of waiting.

8. If you are new to G3-MA and the Proxy Agent, you should begin by

reading the Proxy Agent online guide. To do so, enter online-guide

at the command line prompt. Otherwise, enter proxy-agent at the

command line prompt.

NOTE:

You can get help by entering

Issue 1 April 1996

to continue. The system then opens the Main Menu. If you

, the system opens the Main Menu on its own after a

Return

at any time.

Ctrl-y

Table of Contents

Need help?

Do you have a question about the OneVision DEFINITY G3 Fault Management and is the answer not in the manual?