Conditions Causing Change Of State - AT&T OneVision DEFINITY G3 Fault Management Installation And Integration Manual

States of the Proxy Agent Icons

Conditions Causing Change of State

G3 Proxy Agent icons are in a certain state based on one of several events,
either the NMS polling the Proxy Agent or the Proxy Agent sending traps to
the NMS. The following events can change a G3 Proxy Agent icon's state:
The NMS polls the Proxy Agent for the g3connectAlarmForward object.
If the value is failed, then the icon's state is set to Critical. The default
polling interval for this object is one minute.
The NMS polls the Proxy Agent for the smuxProxyName object. If it does
not contain a single value of g3mgt , then the icon's state is set to Major.
If the icon is in the Major state and a later poll finds a single object
containing the value g3mgt , the state of the icon returns to Normal. The
default polling interval for this object is every five minutes.
The NMS polls the Proxy Agent for the sysDescr object to determine if
the Proxy Agent is responding. If the response indicates the object does
not exist or if there is no response, the state of the icon is set to Major. If
the icon is in the Major state and a subsequent poll finds a valid
response, the state of the icon returns to Normal. The default polling
interval for the sysDescr object is one minute.
Issue 1 April 1996
31