Euromaid DW24S Instruction Manual page 31

� �
� � �
1 On/Off button
On/Off indicator light
2
3 Programme selection Knob
4 Start/Cancel button
LED progress indicator lights
5
6 Rinse aid level indicator light
On/off button
Push in the on/off button and check that the indicator light comes
on.
Rinse aid level indicator light
Visual Indicator
If the indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Program selection Knob
Use the program selection Knob to choose your washing program.
Start/Cancel button
You use the button to start the selected program; the light on the
button lights up.
Stop the program with the Start / Cancel button if you would like to
open the door once the dishwasher's washing program is running.
LED progress indicator lights
On/Off
The program sequence throughout the
washing process can be monitored from the
Wash
progress indicator lights on the control panel.
Dry
End
! Warning
Following the washing stage, in order to
drain and remove water from inside the
machine completely, the machine will cancel for approximately 35
minutes. Do not worry this is not a fault. The End progress indicator
when finished
light will come on
! Warning
Do not switch the machine off before End light comes on.
How to cancel the washing program
To cancel a program while the machine is operating:
Press start/stop button for 3 seconds. The machine will drain the
water inside the machine for 45 seconds. The program is cancelled
when washing light goes off. Then, you can choose and start a new
program.
! Important:Depending on the stage of the program you have
cancelled, there may be detergent residue or rinse aid inside the
machine and on the load. Make sure the items in the dishwasher
are not used before washing properly.
How to change the washing program
To change the program selection while the machine is operating:
Press Start/Cancel button. The washing light will go off.
Select the new program. Press Start/Cancel button. The washing
light will be on and new program will start.
! Important:The new program will NOT start from the beginning.
It will start from the stage last carried out by the previous program
selection.
QUICK REFERENCE GUIDE
.
Improper Loading Of Dishware
�
EN
17 9140 01 00_AA