AT&T MERLIN LEGEND MLX-10D User Manual page 104

Features
To Program a Leave Message Button
1. Label button to be programmed as Leave Message.
Press Menu.
2.
Select Ext Program[Prog].
3.
4. Select
Start.
Press button you labeled Leave Message.
5.
Select ListFeature[List].
6.
7.
Select MsgLeave[LvMsg].
If this feature is not displayed, use
Press Home.
8.
To Leave a Message on a Busy or Unanswered Phone
If using programmed Leave Message button, press button.
You continue to hear ringing or busy signal, but your co-worker's message
light goes on and the message is recorded.
If using display:
1. Press Feature.
2. Select LeaveMsg[LvMsg]
If this feature is not displayed, use
3. Read status of message.
If message is delivered:
If message is not delivered because co-worker's message box
is full:
Message Box Full
If message is not delivered for any other reason:
Cannot Send Message
If your co-worker has a display phone, a display
Note:
message is left automatically. If your co-worker has
voice-mail, a recorded message, with your extension and
name, is left.
5-38
Messaging
FindFeature[Find]
or dial 25.
FindFeature[Find]
Msg Sent to: (co-worker's name)
More.
or press
More.
or press