Get a free line without having to
push a button or interrupt some-
one else's call. In addition, the
lights next to line buttons make
it easy to keep track of calls.
Red light indicates line
you are on.
Green light indicates if
line is free, busy, or on
hold.
Fast flashing = you put
call on hold
Slower flashing = some-
one else put call on hold
Have access to a "pool" or group
of outside lines through a single
button. This frees buttons for pro-
grammable features.
Touch
Intercom-Ring
or
Intercom-Voice to contact others
connected to your MERLIN
system. (See p. 4).
Test your voice terminal and pro-
gram its features using the T/P
switch.
Control the volume of both your
speaker and ringer.
Dial special codes for additional
features. (See p. 15.)
Available Features
Read on to find out how to use these features . . . and many more!
Program buttons so that custom
features, such as Do Not Disturb
and Outside Auto Dial, are yours
with just one touch. (See p. 15.)
Using Conference, connect with
up to two outside lines and two
inside lines at once.
Transfer a call to another voice
terminal with or without voice an-
nouncement. (See p. 8.)
Put calls on hold. (See p. 7.)
Drop one person from a con-
ference call. (See p. 9.)
Touch Speaker for on-hook dial-
ing, group listening, and monitor-
ing a call on hold. (See p. 4 and
9.)
Touch Recall to disconnect a call
without hanging up the handset.
With Centrex or PBX service, use
Recall instead of a switchhook
flash.
Call your attendant for messages
when light is lit.
2
Need help?
Do you have a question about the MERLIN 3070 and is the answer not in the manual?