Installing A Memory Upgrade Module - Fujitsu LifeBook M2011 User Manual

Installing a Memory Upgrade
Module
1
Remove the new memory upgrade
module from the static guarded sleeve.
2
Align the memory upgrade module with
the component side up. Align the
connector edge of the memory upgrade
module with the connector slot in the
compartment. (Figure 14)
3
Insert the memory upgrade module at a
45° angle. Press the connector edge of
the module firmly down and into the
connector until it lodges under the
retaining clip. You will hear a click when it
is properly in place.
4
Replace the cover.
5
Replace the screws.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
O
NCE IT IS INSTALLED
MEMORY CAPACITY
,
YOU SHOULD LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM
.
57 - Memory Upgrade Module
Figure 14. Installing a Memory Module
.