Installing A Memory Upgrade Module; Checking The Memory Capacity - Fujitsu FPCM23451 User Manual

Installing a Memory Upgrade
Module
1
Remove the new memory upgrade
module from the static guarded sleeve.
2
Align the memory upgrade module with
the component side up. Align the
connector edge of the memory upgrade
module with the connector slot in the
compartment. (Figure 14)
3
Insert the memory upgrade module at a
45° angle. Press the connector edge of
the module firmly down and into the
connector until it lodges under the
retaining clip. You will hear a click when it
is properly in place.
4
Replace the cover. and the screws.

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one,
be sure to check that your notebook has recognized the change.
Check the memory capacity by clicking [Start] > Control Panel, then select one of the icon views from
the View by: dropdown list. Click the System icon. Check the amount of memory shown in the System
details at the bottom right of the window..
I
F THE TOTAL MEMORY DISPLAYED IS INCORRECT
PROPERLY INSTALLED
CORRECTLY RECOGNIZED
Figure 14. Installing a Memory Module
. (I
F THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT
, T
SEE ROUBLESHOOTING ON PAGE
57 - Memory Upgrade Module
,
CHECK THAT YOUR MEMORY UPGRADE MODULE IS
64.