Using The Mid Eq - Focusrite Green Range Manual

Off position: Set the gain control in the middle position, so that it is neither boosting
nor cutting frequencies.
+18
0dB
-18

Using the Mid Eq

Use the Mid Eq to colour the sound and create a presence. For example, you can
take the sound of a vocal and improve its clarity in the mix. You can also use the Mid
Eq with the Notch switch to notch out a frequency. For example, if the sibilants in
the vocal sound are very pronounced, you may want to notch them out instead of
making heavy use of the De-esser, to give a more natural sound.
To isolate the frequency you want to boost or cut:
1. Add some gain to the signal, so that you can hear the effect easily
2. Ensure that Notch is not switched in, so that it is easier to hear the area you
are affecting
3. Modify the frequency until you find the area you want to work on
4. Modify the gain to control the amount of the selected frequency that is added to
or subtracted from the signal
5. If you want to affect only a very narrow band of frequencies, use the Notch switch
- if you use the Notch switch, it is likely that you will have to fine-tune the frequency
Frequency
gain
Notched
attenuation
f u n c t i o n s
ƒ
17