Table of Contents
Advertisement
40
CPU Over-clocking Func. (Disabled)
This item decides the CPU over-clocking function/frequencyinstalled in your sys-
tem. If the over-clocking fails, please turn offthe system power. And then, hold the
PageUp key (similar to theClear CMOS function) and turn on the power, the BIOS
willrecover the safe default.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Memory Voltage (1.90V)
This item allows users to adjust the DDR memory voltage.
Press <Esc> to return to the main menu setting page.
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized defaults or
not. You select [OK], and then <Enter>, the Setup Utility loads all default values; or
select [Cancel], and then <Enter>, the Setup Utility does not load default values.
Supervisor Password
This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Supervisor Password
Change Supervisor Password
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Supervisor Password
:Not Installed
Press Enter
: Move
Enter : Select
+/-/: Value
F10: Save ESC: Exit
F1: General Help
F9: Load Default Settings
Using BIOS
Help I
tem
Install or Change the
password.
Hide quick links:
Advertisement
Table of Contents
