Advanced Chipset Setup - ECS G43T-M Manual

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
DRAM Frequency
Configure DRAM Timing by SPD
Pre-allocated share mem
DVMT Memory
Memory Remap Feature
HPET
: Move
F1: General Help
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
Pre-allocated share mem (64MB)
This item is used to choose the pre-allocated Graphics VGA memory size when IGD
(Internal Graphics Device) is enabled.
DVMT Memory (256MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory, according to system and graphics requirements.
Memory Remap Feature (Enabled)
This item allows you to remap the overlapped PCI memory above the total physical
memory if you have a 64 bit OS and 8 GB of RAM.
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
Auto
Enabled
64MB
256MB
Enabled
Enabled
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
Help Item
Options
Auto
667 MHz
800 MHz
33