Connecting I/O Devices - ECS G43T-M Manual

22

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse
PS2 Keyboard
VGA Port
HDMI Port
USB Ports
LAN Port
Audio Ports
Use the upper PS/2 port to connect a PS/2 pointing device.
Use the lower PS/2 port to connect a PS/2 keyboard.
Connect your monitor to the VGA port.
Connect the HDMI port to the HDMI devices.
Use the USB ports to connect USB devices.
Connect an RJ-45 jack to the LAN port to connect your
computer to the network.
Use the audio jacks to connect audio devices. The D port is
for stereo line-in signal, while the F port is for microphone
in signal. This motherboard supports 8-channel audio de-
vices that correspond to the A,B, C, and E port respec-
tively. In addition, all of the 3 ports, B, C, and E provide
users with both right & left channels individually. Users
please refer to the following note for specific port function
definition.
A : Center & Woofer D : Line-in
B : Back Surround E : Front Out
C : Side Surround F : Mic_in Rear
The above port definition can be changed to audio input or
audio output by changing the driver utility setting.
Installing the Motherboard