Integrated Peripherals - ECS G43T-M Manual

34

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Onboard SATA Mode
Onboard LAN Function
Onboard LAN Boot ROM
Onboard AUDIO Function
Serial Port1 Address
USB Functions
Legacy USB Support
On Chip SATA2 Controller
Onboard SATA Mode (Enhanced)
Use this item to select the mode of the Serial ATA.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
OnBoard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
On Chip SATA2 Controller (Enabled)
This item allows you to enable or disable the on chip SATA2 controller.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
Enhanced
Enabled
Disabled
Enabled
3F8&IRQ4
Enabled
Enabled
Enabled
: Move Enter : Select
+/-/: Value F10: Save ESC: Exit
F1: General Help
F9: Load Default Settings
Using BIOS
Help Item
Options
Disabled
Compatible
Enhanced