Making The Network Settings (Network) - Denon AVR-4520CI Owner's Manual

Integrated network av receiver
Hide thumbs Also See for AVR-4520CI:
Table of Contents

Advertisement

Check Results
This function enables you to check the measurement results and equalizer characteristics after Audyssey ®
Setup.
1
Press
SETUP
to display the menu on the TV screen.
2
to select "Speakers" – "Audyssey ® Setup" and then press
ui
Use
3
Use
ui
to select "Check Results" and then press
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
Amp Assign
Channel Select
Check Results
Restore...
Start
4
ui
Use
to select the item you want to check, then press
Measurement results for each speaker are displayed.
Speaker Config.
Check the speaker configuration.
Distances
Check the speaker distance.
Levels
Check the speaker channel level.
Crossovers
Check the speaker crossover frequency.
Equalizers
Check the equalizer.
ui
• If "Equalizers" is selected, press
to select equalizing curve ("Audyssey" or "Audyssey Flat") to
be checked.
ui
Use
to switch the display between the different speakers.
5
Press
o
or
BACK
.
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey ® Setup settings
If you set "Restore..." to "Restore", you can return to Audyssey ® Setup measurement result (value
calculated at the start by MultEQ ® XT 32) even when you have changed each setting manually.
DVD
Set up speakers (Audyssey ® Setup)
ENTER
p
or
.
ENTER
.
Check Results
Check Audyssey Setup Measurement results.
Speaker Config.
Distances
Levels
Crossovers
Equalizers
ENTER
.
40
Making the network settings
(Network)
This unit can be connected to a home network (LAN) to listen to Internet Radio or play back music files and
still image (JPEG) files stored on a computer.
1
Connect the Ethernet cable
(vpage 31
2
Turn on this unit
(vpage
41).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in "Settings"
(vpage 148).
"Connecting to a home network (LAN)").

Advertisement

Table of Contents
loading

Table of Contents