Playback In Zone2/Zone3/Zone4 (Separate Room); Audio Output; Q Zone Playback By Speaker Output - Denon AVR-4520CI Owner's Manual

Playback in ZONE2/ZONE3/ZONE4 (Separate room)

• You can operate this unit so as to enjoy audio in a room (ZONE2,
ZONE3 and ZONE4) other than the MAIN ZONE (room where the
unit is located).
• You can simultaneously play back the same source in both the MAIN
ZONE, ZONE2, ZONE3 and ZONE4. You can also play back separate
sources in the MAIN ZONE, ZONE2, ZONE3 and ZONE4.
• When a TV is connected to the HDMI ZONE4 OUT connector, you
can play back a video or audio from the device connected to the
HDMI 1 – 6 IN connector in ZONE4 (HDMI ZONE4 function).
The source selected for ZONE2 is also output from the recording
output connectors (MEDIA PLAYER).
NOTE
The following restrictions apply to the HDMI ZONE4 function.
• If you select a same input source for MAIN ZONE and ZONE4, audio
playback may be restricted or video may be interrupted.
• Video may not be output depending on the resolution of the TV used
for MAIN ZONE and ZONE4. In this case, use your player to set the
resolution of the TV.
• When HDMI ZONE4 function is used, you cannot set the following.
• Picture Adjust • i/p Scaler
• Auto Lip Sync • Progressive Mode
• Video Mode • Aspect Ratio
• Video Conversion • Setup menu display
DVD

Audio output

It is possible to play 2-channel audio in rooms other than the MAIN ZONE where multi-channel playback is done. Choose one of the methods.

q Zone playback by speaker output

w Zone playback by audio output (PRE OUT)
Use an external amplifier.
q Zone playback by speaker output
• When "Assign Mode" (vpage 141) in the menu is set to any of the following, audio is output from speakers in ZONE2 or ZONE3.
• 7.1ch + ZONE2 • 5.1ch + ZONE2/3
• 7.1ch + ZONE2/3-MONO • 5.1ch(Bi-Amp) + ZONE2
Also, connectors that ZONE2 or ZONE3 speakers are connected to differ according to the "Main Speakers" (vpage 141) setting.
n Connecting and setting the speakers
"Assign Mode" setting (vpage 141)
and audio signals output
7.1ch + ZONE2
Output signal :
5.1ch(Bi-Amp) +
Stereo (L / R)
ZONE2
Output signal :
5.1ch + ZONE2/3
Stereo (L / R)
7.1ch +
Output signal :
ZONE2/3-MONO Monaural
111
Connecting the speakers
ZONE2
(L) (R)
w q w q
ZONE2
(L) (R)
w q w q w
ZONE2 ZONE3
w w q
ZONE3
(L) (R)
q w q
v See overleaf