Denon AVR-4520CI Owner's Manual page 126

Setting items
Height Gain Low : Reduce the front height channel volume.
Control the front height Normal : Front height channel sound is output with standard sound
channel volume. volume.
High : Increase the front height channel volume.
NOTE
"Height Gain" is displayed for the following settings.
• When the "Speaker Config." – "Front Height" setting (vpage 142) is
set other than to "None".
• When sound mode is "PLgz" or the PLgz decoder is used.
Speaker Select n When "Assign Mode"
Makes settings for the ZONE2/3-MONO" and "7.1ch(Bi-Amp)"
speakers outputting sound.
Surround Back : Sound is output from the surround back speakers.
Height : Sound is output from the front height speakers.
Wide : Sound is output from the front wide speakers.
n When "Assign Mode" (vpage 141) is set to "9.1ch(SB/FH/FW)"
Back/Height : Sound is output from the surround back and front height
speakers.
Back/Wide : Sound is output from the surround back and front wide
speakers.
Height/Wide : Sound is output from the front height and front wide
speakers.
NOTE
Only speakers that are set to something other than "None" in "Speaker
Config." (vpage 142) can be selected.
Set Defaults Reset : Reset to the defaults.
The "Surround Parameter" Cancel : Do not reset to the defaults.
settings are returned to the
When you select "Set Defaults" and press
default settings.
ENTER
, the "Reset all surround parameters
to the factory defaults?" prompt is displayed.
Select either "Reset" or "Cancel", and press
ENTER
.
DVD
Setting details
(vpage 141) is set to "7.1ch + ZONE2", "7.1ch +
Tone
Adjust the tonal quality of the sound.
Setting items
Tone Control On : Allow tone adjustment (bass, treble).
Set the tone control function Off : Playback without tone adjustment.
to "On" and "Off".
"Tone Control" can be set when "Dynamic EQ" (vpage 125) is set
to "Off".
NOTE
• "Tone Control" settings are not reflected to ZONE2 and ZONE3.
• The tone cannot be adjusted in the "DIRECT" and "PURE DIRECT"
mode.
Bass –6dB – +6dB (0dB)
Adjust bass.
"Bass" can be set when the menu "Tone Control" setting is "On".
Treble –6dB – +6dB (0dB)
Adjust treble.
"Treble" can be set when the menu "Tone Control" setting is "On".
123
Audio
Default settings are underlined.
Setting details