Picture In Picture Activation; Picture In Picture Source; Position Of Picture In Picture Window - Barco BarcoSLM G10 Performer Owner's Manual

7. Random Access Adjustment Mode
7.6.2

Picture in Picture activation

How to activate PIP?
1. Push the cursor key ↑ or ↓ to highlight PIP. (menu 7-54)
2. Press ENTER to select.
The PIP menu will be displayed. (menu 7-55)
3. Push the cursor key ↑ or ↓ to highlight Status.
4. Press ENTER to toggle between ON and OFF.
ON PIP is active
OFF PIP is not active
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
SCENERGIX
PIP
SAVE CHANGES
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-54
7.6.3

Picture in Picture source

Which source displayed in PiP
1. Push the cursor key ↑ or ↓ to highlight Source. (menu 7-56)
2. Press ENTER to select.
3. Enter the source number with the remote control. Start always with 0.
PIP
STATUS [ON]
SOURCE 01
POSITION [Top-Left]
QUICK SELECT [OFF]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-56
7.6.4

Position of Picture in Picture window

What can be done?
The PiP window can be placed in on of the four corners of the main window.
86
PIP
STATUS [ON]
SOURCE 01
POSITION [Top-Left]
QUICK SELECT [OFF]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-55
R5976562 BARCOSLM G10 PERFORMER 20/10/2004