System Panel Connector - Asus P5P800-VM Manual

11. System panel connector (0-1 pin PANEL)
This connector supports several chassis-mounted functions.
®
P5P800-VM System Panel connector
The sytem panel connector is color-coded for easy connection. Refer to
the connector description below for details.
• System power LED (-pin PLED)
This -pin connector is for the system power LED. Connect the
chassis power LED cable to this connector. The system power LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
• System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
• Hard disk drive activity (-pin IDE_LED)
This -pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
• System Management Interrupt Lead (-pin SMI)
This -pin connector allows you to manually place the system into a
suspended mode, or "green" mode, where system activity is instantly
decreased to save power and to expand the life of certain system
components. Attach the chassis-mounted suspend switch to this
connector.
• Power/Soft-off button (-pin PWRSW)
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-OFF
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
• Reset button (-pin RESET)
This -pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.
ASUS P5P800-VM
PLED
PANEL
IDE_LED
SMI PWRSW
Requires an ATX power supply.
*
SPEAKER
RESET
1-33