Asus P5P800-VM Manual page 43

7. ATX power connectors (0-pin ATXPWR,4-pin ATX1V)
These connectors are for an ATX power supply. The plugs from
the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
• Do not forget to connect the 4-pin ATX +1 V power plug;
otherwise, the system will not boot up.
• Use a PSU with a minimum power rating of 300 W on this
motherboard. Use of a PSU with a higher power output
is recommended when configuring a system with more
power-consuming devices. The system may become unstable or may
not boot up if the power is inadequate.
®
P5P800-VM ATX power connector
8. Front panel audio connector (10-1 pin FP_AUDIO)
This connector is for a chassis-mounted front panel audio I/O module
that supports legacy AC '97 audio standard. Connect one end of the
front panel audio I/O module cable to this connector.
®
P5P800-VM Front panel audio connector
ASUS P5P800-VM
ATX12V
+12V DC GND
+3.3VDC
-12.0VDC
GND
PS_ON#
+12V DC GND
GND
GND
GND
-5.0VDC
+5.0VDC
+5.0VDC
FP_AUDIO
ATXPWR
+3.3VDC
+3.3VDC
GND
+5.0VDC
GND
+5.0VDC
GND
PWR_OK
+5VSB
+12.0VDC
1-31