Replacing The Battery - Fluke 80 Series V User Manual

80 Series V
Users Manual
Good F2 fuse: 00.0
00.5
Replace fuse: OL
Touch top half
of input contacts
Good F1 fuse: 0.995 k
1.005 k
Replace fuse: OL
Figure 10. Testing the Current Fuses
36
87 V TRUE RMS MULTIMETER
to
˚ C/ ˚ F
MIN MAX RANGE
Peak MIN MAX
REL
4½ DIGITS
1 Second
mV
V
LO LO V
OFF
A mA A COM
400mA
FUSED
10A MAX
FUSED
87 V TRUE RMS MULTIMETER
˚ C/ ˚ F
MIN MAX RANGE
Peak MIN MAX
REL
4½ DIGITS
to
1 Second
mV
V
LO LO V
OFF
A mA A COM
400mA
FUSED
10A MAX
FUSED

Replacing the Battery

Replace the battery with a 9 V battery (NEDA A1604,
6F22, or 006P).
AutoHOLD
Hz %
mA
A
To avoid false readings, which could lead to
A
possible electric shock or personal injury,
V
replace the battery as soon as the battery
indicator (b) appears. If the display shows
bAtt the Meter will not function until the
battery is replaced.
Replace the battery as follows, refer to Figure 11:
1. Turn the rotary switch to OFF and remove the test
leads from the terminals.
AutoHOLD
2. Remove the battery door by using a standard-blade
Hz %
mA screwdriver to turn the battery door screws one-
A
A
quarter turn counterclockwise.
3. Replace the battery and the battery door. Secure the
V
door by turning the screws one-quarter turn
clockwise.
aom5f.eps
W Warning
X