Fluke 80 Series V User Manual page 20

80 Series V
Users Manual
Table 5. Display Features (cont.)
Number Feature
Amperes (amps), Microamp, Milliamp
M
A, A, mA
Volts, Millivolts
V, mV
Microfarad, Nanofarad
F, nF
Nanosiemens
nS
Percent. Used for duty cycle
%
measurements.
Ohm, Megohm, Kilohm
e, Me, ke
Hertz, Kilohertz
Hz, kHz
Alternating current, direct current
AC DC
N
Degrees Celsius, Degrees Fahrenheit
C, F
O
610000 mV Displays selected range
The Meter is in high resolution
P
HiRes
(Hi Res) mode. HiRes=19,999
The Meter is in autorange mode and
Auto automatically selects the range with
Q
the best resolution.
Manual The Meter is in manual range mode.
12
Indication
Number Feature
The number of segments is relative
R
to the full-scale value of the
selected range. In normal operation
0 (zero) is on the left. The polarity
indicator at the left of the graph
indicates the polarity of the input.
The graph does not operate with
the capacitance, frequency counter
functions, temperature, or peak min
max. For more information, see
"Bar Graph". The bar graph also
has a zoom function, as described
under "Zoom Mode".
0L
-- Overload condition is detected.
Display Messages
Replace the battery immediately.
bAtt
In the capacitance function, too much electrical
diSC
charge is present on the capacitor being tested.
Invalid EEPROM data. Have Meter serviced.
EEPr Err
Invalid calibration data. Calibrate Meter.
CAL Err
W Test lead alert. Displayed when the test leads
are in the A or mA/ A terminal and the selected
LEAd
rotary switch position does not correspond to the
terminal being used.
Invalid model. Have Meter serviced.
F8/Err
Open thermocouple is detected.
OPEn
Indication