Fluke 80 Series V User Manual page 17

Switch
Button
Positon
Any switch
D
position
Frequency
counter
MIN MAX
recording
Power-up
H

Any switch
position
E
Continuity
ReE
MIN MAX
recording
Hz, Duty
Cycle
Power-up
Table 4. Pushbuttons (cont.)
AutoHOLD (formerly TouchHold) captures the present reading on the display. When a new,
stable reading is detected, the Meter beeps and displays the new reading.
Stops and starts recording without erasing recorded values.
Stops and starts the frequency counter.
Turns on all LCD segments.
Turns the backlight on, makes it brighter, and turns it off.
H
For Model 87, hold down for one second to enter the HiRes digit mode. The "HiRes" icon
appears on the display. To return to the 3-1/2 digit mode, hold
HiRes=19,999
Turns the continuity beeper on and off
Switches between Peak (250 s) and Normal (100 ms) response times.
Toggles the meter to trigger on positive or negative slope.
Disables the beeper for all functions. The Meter reads "bEEP" until
Function
H
down for one second.
E
Multimeters
The Meter's Features
is released.
9