Recalibrating The Batteries - Fluke TiR4 User Manual

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual
To charge camera batteries:
Charge at least one battery for 3 hours before use. Two batteries
charge sequentially. The second battery remains in standby mode
until the first battery is charged.
1. Connect battery charger AC power supply to a power outlet. An outlet
adapter may be necessary outside of the United States.
2. Connect the power supply to the dual-bay battery charger.
3. Insert one battery into one of the battery charger bays; insert the second
battery—if available—into the second charger bay.
The LED indicator in front of each bay indicates the charging status as shown
in Table 8-2.
LED Indicator
Off
Green Flashing
Green Solid
Yellow Flashing
Yellow/Green
Yellow Solid
Red Flashing

Recalibrating the Batteries

You should recalibrate your camera batteries periodically to maintain the
accuracy of the battery gauge. If a battery requires recalibration, a warning
popup window appears on the camera display screen when you power on your
camera.
8-4
Note
Table 8-2. Battery Charging Status
Charging Status
No battery detected
Fast charging
Fully charged
Recalibrating
Recalibrated
Standby
Error