ECS P33T-A Manual page 44

38
DeltaT (+3)
This item specifies the range that controls CPU temperature and keeps it from
going so high or so low when smart fan works.
SMART Fan Slope PWM value (4 PWM value/°C)
This item is used to set the Slope Select PWM of the smart fan.
CPU Fan Full Limit Temp. (°C) (69°C)
This item is used to set the limit temperature of the smart fan.
ECS supports the latest PECI host technology. While using Wolfdale or
Yorkfield CPU, the original images of the BIOS item "PC Health Status"
and "Smart FAN Function" will be replaced by PECI mode and negative
number. (The max data from PECI is zero.)
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
-=- System Hardware Monitor-=-
Smart Fan Function
System Temperature
CPU FAN Speed
SYS FAN Speed
PWR FAN Speed
CPU Core
VDIMM
-=- PECI Mode-=-
Offset to TCC Activation Temp.:
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
CPU SMART FAN Control
SMART Fan start PWM value
SMART Fan start PWM TEMP (-)
DeltaT
SMART Fan Slope PWM value
CPU Fan Full Speed Offset (-)
Press <Esc> to return to the PC Health Status page.
PC Health Status
Press Enter
: 22°C/71°F
: 3571 RPM
: N/A
: N/A
: 1.104V
: 1.824V
-81
: Move Enter : Select +/-/: Value
F1: General Help
F9: Load Default Settings
Smart Fan Function
Enabled
28
30
+3
5
10
: Move Enter : Select +/-/: Value
F10: Save ESC: Exit
F1: General Help
F9: Load Default Settings
Introducing the Motherboard
Help Item
F10: Save ESC: Exit
Help Item
Options
Disabled
Enabled