Loose Fuel Filler Cap Message; Vehicle Loading; Vehicle Certification Label - Dodge Challenger Owner's Manual

332 STARTING AND OPERATING
• When the fuel nozzle "clicks" or shuts off, the fuel
tank is full.

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel
filler cap is loose, improperly installed, or damaged, a
"gASCAP" message will display in the odometer or a
"Check Gascap" message will display in the Electronic
Vehicle Information Center (EVIC) (if equipped). If this
occurs, tighten the fuel filler cap properly and press the
TRIP ODOMETER button to turn off the message. If the
problem continues, the message will appear the next time
the vehicle is started.
A loose, improperly installed, or damaged fuel filler cap
may also turn on the MIL. Refer to "Onboard Diagnostic
System" in "Maintaining Your Vehicle" for further
information.

VEHICLE LOADING

The load carrying capacity of your vehicle is shown on
the "Vehicle Certification Label." This information
should be used for passenger and luggage loading as
indicated.
Do not exceed the specified Gross Vehicle Weight Rating
(GVWR) or the Gross Axle Weight Rating (GAWR).

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to
the rear of the driver's door.
The label contains the following information:
• Name of manufacturer
• Month and year of manufacture
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR) front