Selecting Pre-Cut Maps; Selecting By Address - Acer Destinator PN User Manual

6.
7.

5.7 Selecting Pre-Cut Maps

Selecting by Address

1.
2.
Destinator PN User Guide
- Click on this icon to delete all points from the
route.
and - Changes the numerical order of
the points on the map and in the right-hand pane.
First, highlight a point in the right-hand pane, and then
click one of these icons.
When you have established all the points on the
route, click the Create Route
all the points become connected by a blue line that is
bordered by a corridor. You can use any of the tools
described in step 5 to modify the route shown. If you
modify the route, you will have to recreate the route
by simply clicking on the Create Route icon again.
To create a map of the route, click on Cut Map
. You will be prompted to give the map a
name. The map will be displayed in the "My Maps"
section on the Destinator Console. Then, you can
download the map to your Pocket PC just as you
would download any other map as described in
Chapter 2.
Select map to load from Standard Maps, eg: Italy.
Click Cut Map
automatically loaded to hard disk and displayed in the
Map Cutter window.
Page 37 of 118
icon. Notice that
. The selected map (Italy) is