Table of Contents
Advertisement
10
Auto & Favorites Alerts
10.1 Introduction
10.2 Configuring Auto Alerts Category
Destinator PN User Guide
10
An Automatic Alert refers to an item that you configure so
that Destinator will alert you when you are within a certain
distance of the item's location. You can configure two
distances for each Automatic Alert. Destinator will first alert
you when you are within the first distance and then alert you
when you are within the second. Automatic Alerts must be
stored in either one of three predefined categories - Auto
Alerts 1, Auto Alerts 2, and Favorites Alerts.
Note that this configuration is applied to all items in the
category.
1.
From the Destination dialog, select Favorites.
2.
Highlight the Auto Alerts folder you want to configure
and select Edit... from the Tools menu in the lower-
right corner.
3.
To enable both alerts, check both boxes. Or, you can
disable one of the alerts by clearing the box next to it.
If you configure two alerts, the first must have a
greater distance than the second.
4.
From the pull-down menus, select a distance for each
enabled alert. Destinator will alert you when the
distance between your current traveling position and
the location of the alert equals the distance you enter
here.
5.
Close the Edit menu.
Page 101 of 118
Advertisement
Table of Contents
