Table of Contents
Advertisement
Destinator PN User Guide
Dynamic cursor
Destinator PN's screen cursor has the capability to automatically
change its appearance so that you will be informed of several
important navigation conditions:
• The cursor indicates if you are in Car or Pedestrian mode
• The cursor indicates if you are driving at high or low speeds.
The cursor becomes elongated at higher speeds and wider at
lower speeds.
• The cursor displays a shadow that shows the position of the
Sun. This is especially important if you are using Destinator
PN in Pedestrian mode. By positioning yourself so that the
shadow that you cast is in the same position as the shadow on
the screen, you can be assured that you are walking in the
right direction.
• The cursow shadow disappears during night driving.
Map Screen Buttons
Toggles between Turn by Turn details and a complete list of
Driving Directions.
Toggles between 2D, 2D Night, 3D and 3D Night views. The
icon indicates the next view to be displayed.
Shows magnetic direction as you move.
Lets you define and plan your route via the Destination
Menu. Also allows you to access the Options Menu and Settings
Menu. Indicates whether you are in Vehicle Mode (
Pedestrian Mode (
down the button for several seconds, or by opening the Options
Menu and pressing either
the navigation radius is restricted to 10 kilometres (6 miles).
Displays details about your route, such as ETA, ETR and the
distance to your destination.
Page 49 of 118
). You can change modes by holding
or
. In Pedestrian Mode,
) or
Advertisement
Table of Contents
