Protecting Images - Acer Digital camera 10.1 Mega pixels CCD User Manual

Protecting Images

Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Slide the mode switch to [
2. Select the image that you want to protect
with the /
3. Press the MENU button.
The playback menu is displayed.
4. Select [Protect] with the
press the SET button.
5. Select [Single] or [All] with the
and press the SET button.
6. Select [Set] with the
the SET button.
Protection is applied to the image and
the camera returns to the playback mode.
The protect icon [
protected images.
When [All] has been selected, [
displayed with all the images.
Canceling the Protection
To cancel protection, display the image that you want to remove the image protection.
1. Select [Protect] with the
SET button.
2. Select [Single] or [All] with the
3. Select [Cancel Protect] with the
The removal of image protection is executed and the camera returns to the
playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the
SET button.
2. Select [Select] with the
The images are displayed in the thumbnail display.
3. Select the image you want to protect with the
button.
The protect icon [
image and pressing the
is repeated to select multiple images.
4. Press the SET button.
Protection and cancellation the protection are executed and the camera returns
to playback mode.
Formatting an SD memory card (or internal memory) overrides protection, and
erases all images regardless of their protected status.
EN-34
].
buttons.
/ buttons, and
/
/ buttons, and press
] is displayed with
/ buttons from the playback menu, and press the
/ buttons from the playback menu, and press the
/ buttons, and press the SET button.
] is displayed with protected images. Selecting a protected
button again will cancel the protection. This procedure
buttons,
] is
/ buttons, and press the SET button.
/ buttons, and press the SET button.
/ / / buttons, and press the