1. Rotate the mode dial to
and turn your camera on by
pressing the power switch.
displayed on the LCD monitor. This is a
brief guide to the selected mode which
disappears in a few seconds.
3. Compose the image on the LCD monitor
screen so that the main subject is within
the focus frame.
4. Press the shutter release button down halfway to focus the image.
When you press the shutter release button down halfway, the camera's Auto
Focus feature automatically focuses the image. The focus frame turns green if
the subject is in focus. Proper exposure is determined and locked at the same
5. Press the shutter release button the rest of the way down to capture the image.
The actual captured image appears to be larger than the one displayed by the LCD monitor
screen after the image has been captured.
button, the display changes in the following order: Normal Display
To enable/disable Mode-dial Help function, set the [Option-Mode-dial Help] to [On]/[Off] in the
button switches the LCD monitor display mode. Each time you press the