Auto Off; Video Output; System Info; Setup2 Menu - Acer Digital camera 10.1 Mega pixels CCD User Manual

Setup2 Menu

1. Slide the mode switch to [
2. Press the MENU button, and select the
[Setup2] menu with the
The [Setup2] menu is displayed.
3. Select the desired [Setup2] option item with
the / buttons, and press the SET button
to enter its respective menu.
4. Select the desired setting with the
buttons, and press the SET button.
5. To exit from the menu, press the MENU
button.

Auto OFF

If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful to reduce battery wear.
* 2 Min. / 3 Min. / 5 Min.
Date/Time
Refer to section in this manual titled "Setting the Date and Time" for further details.
Sys. Reset
This returns all basic settings to the camera's default settings. The time setting will not
be reset.
* Cancel / Execute
Language
Refer to section in this manual titled "Choosing the Display Language" for further
details.

Video Output

This sets video output system of the video equipment that you are going to connect
to the camera.
* NTSC / PAL

System Info.

This displays the firmware version of the camera.
].
button.
/
EN-51