User Setting Mode; Video Mode - Acer Digital camera 10.1 Mega pixels CCD User Manual

[

] User Setting Mode

This mode allows you manually set the setting parameters and all these settings will
be memorized.
1. Slide the mode switch to [
mode dial to [
2. Compose the image, press the shutter button
down halfway, then press it down fully.
[

] Video Mode

This mode allows you to record video clips at a resolution of 640 x 480 pixels. Voice
can also be recorded.
1. Slide the mode switch to [
mode dial to [
2. Compose the scene with the zoom button.
Optical and digital zoom can be used while
composing the scene.
3. Fully press down the shutter button.
The recording of the video clip will start.
Pressing the shutter button again will end
the recording.
The recording time depends on the
storage size and the subject of the image
to be recorded.
Zoom function cannot be used during
video recording.
When recording video clips, the flash cannot be used.
If the access speed of your SD memory card is not enough for recording
video clips in the currently selected quality, a warning icon [
and then the movie recording will stop. In this case, select a video quality
lower than the current one.
EN-26
] and set the
].
] and set the
].
] will appear,