Using An Ac Power Adapter (Optional Accessory); Inserting And Removing An Sd Memory Card (Optional Accessory) - Acer Digital camera 10.1 Mega pixels CCD User Manual

Using an AC Power Adapter (Optional Accessory)

Using an AC power adapter prevents the camera from automatically powered off while
transferring files to your computer.
Perform the steps in the preceding section "Charging the Battery".
Make sure to use only the AC power adapter specified for the digital camera.
Damage caused by the use of an incorrect adapter is not covered under the
warranty.
Inserting and Removing an SD Memory Card (Optional
Accessory)
The digital camera comes with approx. 32 MB of internal memory (25 MB available for
image storage), allowing you to store captured still images or video clips in the digital
camera. However, you can also expand the memory capacity by using an optional SD
memory card so that you can store more files.
Inserting an SD memory card
1. Open the battery / SD memory card cover.
2. Insert the SD memory card in the correct
orientation shown.
Hold the SD memory card with its front side
(printed arrow) facing the rear side of the
camera, and then insert the card as
far as it can go.
3. Close the battery / SD memory card cover.
Removing an SD memory card
Open the battery / SD memory card cover, press lightly on the edge of the SD memory
card and it will eject.
To prevent valuable data from being accidentally
erased from an SD memory card you can slide
the write-protected tab (on the side of the SD
memory card) to "LOCK".
However, to save, edit or erase data on an SD
memory card, you must unlock the card.
Be sure to format an SD memory card with this digital camera before using it.
Refer to section in this manual titled "Formatting an SD Memory Card or
Internal Memory" for further details.
To prevent the damage of an SD memory card, please turn off the power
when inserting or removing the SD memory card. If inserting or removing the
SD memory card with power on, the camera turns off automatically.
EN-13