Pi Seek Setting; Receiving Traffic Information; Receiving Traffic Information While Playing Cd Or Radio; Pty (Programme Type) Tuning - Alpine DVA-7996R Owner's Manual

PI SEEK Setting

1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or
3
Press the BAND button to toggle the mode between
"PI SEEK ON" and "PI SEEK OFF."
4
Press the SETUP button to set the selected mode.

Receiving Traffic Information

1
Press the T.INFO button repeatedly until the T.INFO
indicator appears in the display.
2
Press the DN or
desired traffic information station. When a traffic
information station is tuned in, the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast,
the unit is set in the standby mode. When a traffic
information broadcast begins, the unit automatically
receives it and the display shows "TRF-INFO" for a
few seconds and returns to the PS display.
When the traffic information broadcast is over, the unit
will automatically set in the standby mode.
NOTES
• If the traffic information broadcast signal falls below a certain
level, the unit remains in the receiving mode for 1 minute. If the
signal remains below a certain level for over 1 minute, the
"T.INFO" indicator blinks.
• If you do not want to listen to the traffic information being
received, lightly press the T.INFO button to skip that traffic
information message. The T. INFO mode will remain in the
ON position to receive the next traffic information message.
• If the volume level is changed while receiving traffic
information, the changed volume level will be memorized.
When traffic information is received next time, the volume
level will be automatically adjusted to the level memorized.
• In the T.INFO mode, the SEEK tuning selects only the TP
stations.
Receiving Traffic Information While
Playing CD or Radio
1
Press the T.INFO button repeatedly until the T.INFO
indicator appears in the display.
2
Press the DN or
information station if necessary.
• When a traffic information broadcast starts, the unit
automatically mutes the CD player/changer or the
regular FM broadcast.
• When the traffic information broadcast finishes, the
unit automatically returns to the original source play
before the traffic information broadcast began.
UP button to select "PI SEEK."
UP button to select your
UP button to select a traffic
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for
over 1 minute, the "T.INFO" indicator blinks.
In the CD mode:
When the TP signal can no longer be received, the
traffic information station of another frequency will be
selected automatically.
NOTE
The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional alternate
frequencies to the AF list. The EON indicator appears while an
RDS EON station is being received. If the station being received
does not broadcast the traffic information, the receiver
automatically tunes in the related station that broadcasts the
traffic information when it occurs.
3
Press the T.INFO button to deactivate the Traffic
Information mode.
The T.INFO indicator disappears.
PTY ( Programme Type ) Tuning
1
Press the F button so that the "FUNC" indicator lights up.
2
Press the PTY button to activate the PTY mode, while
the unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently
received will be displayed for 5 seconds.
• If there is no receivable PTY broadcast, "NO PTY"
will be displayed for 5 seconds.
• If no RDS station can be received, the display shows
"NO PTY."
NOTE
If no button is pressed within 5 seconds after pressing the PTY
button, the PTY mode will be automatically cancelled.
3
Press the DN or
after activating the PTY mode to choose the desired
programme type while the PTY (programme type) is
being displayed. Each press scrolls the programme
type by one.
LIGHT M CLASSICS
4
Press the PTY button within 5 seconds after selecting
the programme type to start searching for a station in
the selected programme type.
The chosen programme type indicator blinks during
searching and lights when a station is found.
If no PTY station is found, "NO PTY" will be displayed
for 2 seconds.
5
Press the F button to activate the normal mode.
The "FUNC" indicator light goes out.
NOTE
Operate the unit while the "FUNC" indicator is lights up.
If no buttons are pressed within 5 seconds, the "FUNC"
indicator light goes out.
UP button within 5 seconds
OTHER M
21
-EN