Playing MP3/WMA/AAC Data
When using discs containing both audio data and MP3/WMA/AAC
data.
Setting item: PLAY MODE
Setting content: CD / CMPM
CD:
Plays only the audio data on discs containing both audio
data and MP3/WMA/AAC data.
CMPM: Plays only the MP3/WMA/AAC files on discs containing
both audio data and MP3/WMA/AAC data.
• If a disc is inserted, remove it from this unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
®
Displaying DivX
Disc Information
Setting item: DivX Information
If [
] of DivX Information is touched, a DivX
registered code is displayed.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled Video CD, you can
choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: ON / OFF
ON:
The PBC menu is displayed.
OFF:
The PBC menu is not displayed.
34
-EN
RADIO Setup
Radio Setup Operation
The Parking Brake must be engaged to access the RADIO
mode screen. Attempting to access this screen while driving
will display the warning-CAN'T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
"Setting item" of Radio Setup. Refer to each section for details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
®
file
Touch [
The SOURCE SETUP screen appears.
3
Touch [
The RADIO setup screen appears.
4
Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
RDS CLOCK DISP / FM LEVEL / PI SEEK / RDS REGIONAL / PTY
LANGUAGE / PTY31
5
Touch [RETURN] to return to the previous screen.
RDS Time Display
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
Setting item: RDS CLOCK DISP
Setting content: OFF / ON
ON:
Adjusting Source Signal Levels
If the difference in volume level between the CD and FM radio is too
great, adjust the FM signal level as follows.
Setting item: FM LEVEL
Setting content: LOW / HIGH
PI SEEK Setting
Setting item: PI SEEK
Setting content: OFF / AUTO
] of SOURCE.
] of RADIO.
Adjust the clock automatically based on the time data. In
this case, the clock cannot be adjusted manually.
To adjust it manually, select OFF.