Timer On/Off; Convection Auto Conversion - LG LSE3092ST Owner's Manual

5.4 cu. ft. capacity electric single oven slide-in range with dual convection and baking drawer
Hide thumbs Also See for LSE3092ST:
Table of Contents

Advertisement

Available languages

Available languages

TIMER ON/OFF

The TIMER ON/OFF serves as an extra timer in the
kitchen that will beep when the set time has run out.
It does not start or stop cooking.
The TIMER ON/OFF feature can be used during any of the
other oven control functions.
To set the Timer (example for 5 minutes):
1. Touch TIMER ON/OFF twice. 0:00 and HR inside O
will appear and TIMER will flash in the display.
2. Touch the 5 button.
0:05 will appear in the display.
3. Touch the TIMER button to start the Timer. The time
will count down from 5:00 minutes and the time
remaining will show in the display.
NOTE
If TIMER ON/OFF is not touched, the timer will
return to the time of day.
4. When the set time has run out, End will show in
the display. The indicator tones will sound every 15
seconds until TIMER ON/OFF is touched.
NOTE
If the remaining time is not in the display, recall the
remaining time by touching the Timer ON/OFF button.
NOTE
• If you touch TIMER ON/OFF once, it allows you to
set the time in seconds.
For example, touch TIMER ON/OFF once, and then
5, 0 for 50 seconds.
• If you touch TIMER ON/OFF twice, it allows you to
set the time in minutes.
For example, touch TIMER ON/OFF twice and then
the 5 button for 5 minutes.
To cancel the Timer before the set time has run
out:
1. Touch TIMER ON/OFF once.
The display will return to the time of day.

CONVECTION AUTO CONVERSION

When cooking using convection cycle (Conv. bake and
roast), the oven temperature is automatically reduced by
25°F. The display will show the changed temperature.
This feature is called "AUTO CONVERSION. " Your range
comes with this feature "ENABLED. "
To DISABLE the auto conversion feature : follow below.
1. Touch and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Touch the 1 button to ENABLE or touch the 2 button
to DISABLE.
3. Touch the START button to accept the change.
13
FEATURES

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents