Timer On/Off; Wi-Fi; Settings; Setting The Hour Mode - LG LSE4616ST.BSTLLGA Owner's Manual

Timer On/Off

The Timer feature serves as an extra timer in the
kitchen that beeps when the set time has run out. It
does not start or stop cooking.
The Timer feature can be used during any of the oven
control functions.
Setting the Timer
1
Set the oven mode knob to the Off position.
2
Press Timer On/Off. 0:00 with HR inside it
appears and Timer flashes in the display.
3
Press plus(+) or minus(-) to set the desired
time. Plus(+) increases the time and minus(-)
decreases the time.
4
Press Timer On/Off or Start to start the Timer.
The remaining time countdown appears in the
display.
NOTE
If Timer On/Off is pressed again after the timer
has started, the timer function is canceled.
5
When the set time runs out, End shows in the
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
• Press Timer On/Off twice to set the time in
minutes and seconds.
• Press Timer On/Off once to set the time in
hours and minutes.
Canceling the Timer
1
Press Timer On/Off once.
The display returns to the time of day.

Wi-Fi

The Wi-Fi button is used to connect the appliance to
a home Wi-Fi network.
1
Set the oven mode knob to the Off position.
2
Press and hold Timer On/Off for 3 seconds.
3
The power on chime sounds, SEt appears in the
display, and the Wi-Fi icon (
4
Register the appliance on the Wi-Fi network
using the smart phone app.
5
To disconnect the appliance from the network,
delete it from the registered appliances in the app.
NOTE
See the Smart Functions section in the owner's
manual for more details.

Settings

Set the oven mode knob to the Off position.
Press and hold Start Time for three seconds
(LSE4617 model only) or press Setting.
Then press the Start Time (LSE4617 model only) or
Setting key repeatedly to toggle through and change
oven settings.
The Setting key allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between Fahrenheit
• activate/deactivate the cooktop beeper

Setting the Hour Mode

The control is set to use a 12-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
1
2
3
4

Setting Convection Auto Conversion

When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 °F / 14 °C. This
auto-converted temperature shows on the display. For
example, select Conv. Bake, enter 350 °F, and 325 °F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
1
2
) blinks.
3
4
and Celsius
Set the oven mode knob to the Off position.
Press and hold Start Time for 3 seconds
(LSE4617 model only) or press Setting.
Press plus(+) or minus(-) to set the desired
hour mode on the clock.
Press Start to accept the desired change.
Set the oven mode knob to the Off position.
Press and hold Start Time for 3 seconds
(LSE4617 model only) or press Setting. Then
press Start Time (LSE4617 model only) or
Setting repeatedly until "
display.
Press plus(+) or minus(-) to turn the feature on/
off.
Press Start to accept the change.
OPERATION 25
" appears in the