Table of Contents
Advertisement
5.3
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving
you an overview of the basic system information.
Refer to section 5.2.1 BIOS menu screen for information on the menu screen
items and how to navigate through them.
Main
Advanced
System Time
System Date
Legacy Diskette A
SATA 1
SATA 2
SATA 3
SATA 4
SATA 5
SATA 6
IDE Configuration
AHCI Configuration
System Information
5.3.1
System Time [xx:xx:xx]
Allows you to set the system time.
5.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
5.3.3
SATA1–6
The BIOS automatically detects the connected IDE devices. There is a separate
sub-menu for each IDE device. Select a device item, then press <Enter> to display
the IDE device information.
Main
SATA 1
Device
:Hard Disk
Vendor
:ST3160812AS
Size
:160.0GB
LBA Mode
:Supported
Block Mode:16Sectors
PIO Mode
:4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-6
S.M.A.R.T.:Supported
LBA/Large Mode
Block(Multi-Sector Transfer)M [Auto]
PIO Mode
DMA Mode
SMART Monitoring
32Bit Data Transfer
5-8
Server
[13:44:30]
[Fri, 02/27/2009]
[1.44M, 3.5 in.]
:
[ST3160812AS]
:
[Not Detected]
:
[Not Detected]
:
[Not Detected]
:
[Not Detected]
:
[Not Detected]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Exit
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Select Screen
←→
Select Item
↑↓
+-
Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
Disabled: Disables LBA
Mode.
Auto: Enables LBA
Mode if the device
supports it and the
devide is not already
formatted with LBA
Mode disabled.
Select Screen
←→
Select Item
↑↓
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 5: BIOS setup
Advertisement
Table of Contents
