Table of Contents
Advertisement
6.2.7
Selecting the boot drive from a RAID set
You must have created a new RAID configuration before you can select the
boot drive from a RAID set. See section 6.2.1 Creating a RAID set: Using New
Configuration for details.
To select the boot drive from a RAID set
From the Management Menu, select Configure > Select Boot Drive, and
1.
then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
2.
When prompted, use the arrow keys to select the bootable virtual drive from
the list, then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
3.
The virtual drive is selected as boot drive. Press any key to continue.
6-22
LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008
BIOS Version
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008
BIOS Version
Bootable VDs(1):Current Boot VD(0)
Configuration Menu
Boot Drive 0
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
A.08.09161344R
Select A Boot VD
A.08.09161344R
Select A Boot VD
Chapter 6: RAID configuration
Advertisement
Table of Contents
