Table of Contents
Advertisement
5.5
Server menu
The Server menu items allow you to customize the server features.
Main
Advanced
Remote Access Configuration
Remote Access Configuration
The items in this menu allows you to configure the Remote Access features. Select
an item then press <Enter> to display the configuration options.
Configure Remote Access type and parameters
Remote Access
Serial port number
Base Address, IRQ
Serial Port Mode
Flow Control
Redirection After BIOS POST
Terminal Type
Remote Access [Enabled]
Enables or disables the remote access feature.
Configuration options: [Disabled] [Enabled]
The following items appear only when Remote Access is set to [Enabled].
Serial port number [COM2]
Selects the serial port for console redirection.
Configuration options: [COM1] [COM2]
Base Address. IRQ [2F8h, 3]
This item is not user-configurable and changes with the configuration of Serial
port number.
5-30
Server
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Server
[Enabled]
[COM2]
[2F8h, 3]
[57600 8,n,1]
[Hardware]
[Disabled]
[VT-UTF8]
BIOS SETUP UTILITY
Boot
Exit
BIOS SETUP UTILITY
IPMI configuration
including server
monitoring and
event log.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
Select Remote Access
type.
Chapter 5: BIOS setup
Advertisement
Table of Contents
