Table of Contents
Advertisement
Insert the RAID driver disk to the floppy disk drive. Make sure that Installation
4.
from the Boot Options menu is selected, then press <Enter>.
F1
Help
If you install SLES 10, type brokenmodules=ahci after Boot Options and
press Enter to continue.
5.
When below screen appears, select the floppy disk drive (fd0) as the driver
update medium. Select OK, then press <Enter>.
Please choose the Driver Update medium.
fd0: Floppy
sr0: CD-ROM, TEAC DV-516E
sda: Disk, SEAGATE ST336754SS
sdb: Disk, SEAGATE ST336754SS
Other device
The drivers for the RAID controller are installed to the system.
7-12
Boot from Hard Disk
Installation
Installation--ACPI Disabled
Installation--Local APIC Disabled
Installation--Safe Settings
Rescue System
Memory Test
Boot Options |
F2
Language
F3
1280 x 1024
OK
F4
DVD
F5
Driver
Back
Chapter 7: Driver installation
Advertisement
Table of Contents
