Back Side - Asus TS500-E6/PS4 - 0 MB RAM User Manual

Back side

The back side of the SATA/SAS backplane faces the rear panel when installed.
This side includes the power connectors and SATA/SAS interfaces for the
motherboard Serial ATA connectors or the SAS card.
CON1
CON2
CON4
CON3
Connectors
SGPIO1
SGPIO2
BPSMB1
CON1/CON2/
CON3/CON4
Move the SGPIO_SEL1 jumper on the SATA/SAS backplane to 2–3 when
installing the PIKE RAID card.
2-24
Connects to SATA SGPIO1 connector on the motherboard
Connects to SAS SGPIO2 connector on the motherboard
Connects to Front panel SMB connector on the motherboard
U1
Connects to SATA/SAS connectors on the motherboard
SGPIO1
Description
Connects to 4-pin plug of the power supply
U1
SGPIO_SEL1
SGPIO2
BPSMB1
Chapter 2: Hardware setup