AMD ADA4200DAA5BV - Athlon 64 X2 2.2 GHz Processor Manual page 43

Builder’s guide for amd athlontm 64 processor-based desktops and workstations

Table of Contents

31684 Rev. 3.00 September 2004

21. Make sure the system starts and runs reliably with just the graphics card installed. Restart and

run the system multiple times.

22. Use the following steps to install additional cards at this time, if additional cards are to be

installed.

a. Turn off the system and unplug it before installing each card.

b. Install additional cards one at a time.

c. Restart the system after every card installation.

Note: If you have difficulties with the installation of any of the cards or drivers, contact your

hardware vendor.

23. As you install each card, verify the card is properly seated (connector fully inserted into the

slot, front and back) and that the retention screws are in place.

24. Test the complete system for proper operation. If system functions properly, load any other

software.

Appendix A

Builder's Guide for AMD Athlon™ 64 Processor-

AMD Athlon™ 64

Processor-Based System Build Procedure

Based Desktops and Workstations

Table of Contents

Need help?

Do you have a question about the ADA4200DAA5BV - Athlon 64 X2 2.2 GHz Processor and is the answer not in the manual?